Custom laser cut from titanium, hand finished and assembled to be lightweight and minimalist. This is for a 9mm spacing motor. Works great with a mofo nanobeast, nanobam, micro Komodo or most 1212 size motors with dual pattern and 11t pinion. Will not work will all chassis's out there but should work with quite a few depending on rail shape. Tolerances are tight around everything so careful attention is needed. I suggest installing the motor and setting mesh before installing trans into your truck. 
 Universal skid option: Includes standard center location skid and an offset skid that will give a bit more driveshaft room for forward facing (especially with deadbolt links). Includes stainless standoffs, m2 screws for motor and your choice of color washer for motor mount bolts.

No Gearset Option: Includes both plates with bearings installed, 2 main gear shims, 3 spur gear shims, upper printed spacers  and skid of your choice. Also includes motor mount bolts, washers and standoffs. Most gearsets just require 1 shim on each side of the gear. 

Mamba24 skid option: Will also include two skids, one for forward facing and one for rear facing. 

If you snag one with a Survivor chassis kit and want the skid to match please message or put it in the notes!